MillTurn 910 x 5000 mm s osou C + YWFL
M 100
MillTurn 910 x 5000 mm s osou C + Y
WFL
M 100
Rok výroby
2006
Stav
Použité
Umístění
Babberich
Zobrazit fotky
Zobrazit mapu
ÚDAJE O STROJÍCH
- Popis stroje:
- MillTurn 910 x 5000 mm s osou C + Y
- Výrobce:
- WFL
- Model:
- M 100
- Rok výroby:
- 2006
- Stav:
- dobrý (použitý)
CENA A UMÍSTĚNÍ
- Umístění reklamy:
- Transito 21, 6909 DA Babberich, NL
Volejte
ÚDAJE O NABÍDCE
- ID výpisu:
- A895-7039
- Referenční č.:
- 7046
- Naposled aktualizováno:
- 07.03.2024
POPIS
Výrobce: WFL Austria
Typ: M 100 / 5000
Řízení: Siemen 840C
Rok výroby: 2006
MillTurn M100: Kompletní a komplexní obrábění Soustružení a frézování
Vybaveno:
Cro07392Pp
ATC 108 dvojitý řetěz pro držáky frézovacích nástrojů.
ATC 10 polohové držáky vyvrtávací lišty do 1000 mm
SCHUNK 3 sklíčidla THW 630 - 160R
SMW Stabilní opěrka SLU-Z-5 50 - 310 mm
Oblast použití:
Letectví a kosmonautika
Ropa a plyn
Energetika
Strojírenství
Klikový hřídel
Hydraulika a pneumatika
Specifikace
Metrický standard USA
Max. průměr otáčení
910 mm
Osa X
900 (+850 až -40) mm
Osa Y
500 (+300 až -200) mm
Osa Z
5370 mm
Osa B
200 °
Otvor vřetena
165 mm
Otáčky
1600 otáček za minutu
Výkon vřetena
60 kW
Výměník nástrojů
108
B - osový sběrač
Capto C8
B - otáčky vřetena osy
4000 otáček za minutu
Výkon osy B
25 kW
Dopravník třísek
Ano
Uchycení frézy
6 Mk
Zdvihová pinola
200 mm
Ø pinoly
180 mm
Rozměry (odhad)
Délka
14500 mm
Šířka
4500 mm
Výška
3800 mm
Hmotnost
40000 kg
Upozornění: Informace na této stránce byly získány v dobré víře od nás , a pokud je to možné , od výrobce. informace jsou uvedeny v dobré víře, ale jejich přesnost nelze zaručit. V souladu s tím vás nebudou zastupovat nebo uzavírat smlouvy. doporučujeme vám, abyste si zkontrolovali všechny důležité údaje.
Inzerát byl přeložen automaticky a mohou se vyskytnout chyby překladů.
Typ: M 100 / 5000
Řízení: Siemen 840C
Rok výroby: 2006
MillTurn M100: Kompletní a komplexní obrábění Soustružení a frézování
Vybaveno:
Cro07392Pp
ATC 108 dvojitý řetěz pro držáky frézovacích nástrojů.
ATC 10 polohové držáky vyvrtávací lišty do 1000 mm
SCHUNK 3 sklíčidla THW 630 - 160R
SMW Stabilní opěrka SLU-Z-5 50 - 310 mm
Oblast použití:
Letectví a kosmonautika
Ropa a plyn
Energetika
Strojírenství
Klikový hřídel
Hydraulika a pneumatika
Specifikace
Metrický standard USA
Max. průměr otáčení
910 mm
Osa X
900 (+850 až -40) mm
Osa Y
500 (+300 až -200) mm
Osa Z
5370 mm
Osa B
200 °
Otvor vřetena
165 mm
Otáčky
1600 otáček za minutu
Výkon vřetena
60 kW
Výměník nástrojů
108
B - osový sběrač
Capto C8
B - otáčky vřetena osy
4000 otáček za minutu
Výkon osy B
25 kW
Dopravník třísek
Ano
Uchycení frézy
6 Mk
Zdvihová pinola
200 mm
Ø pinoly
180 mm
Rozměry (odhad)
Délka
14500 mm
Šířka
4500 mm
Výška
3800 mm
Hmotnost
40000 kg
Upozornění: Informace na této stránce byly získány v dobré víře od nás , a pokud je to možné , od výrobce. informace jsou uvedeny v dobré víře, ale jejich přesnost nelze zaručit. V souladu s tím vás nebudou zastupovat nebo uzavírat smlouvy. doporučujeme vám, abyste si zkontrolovali všechny důležité údaje.
Inzerát byl přeložen automaticky a mohou se vyskytnout chyby překladů.
POSKYTOVATEL
Kontaktní osoba: Pan Mach4Metal Mach4Metal
Transito 21
6909 DA Babberich, Nizozemsko
+31 316 4... zobrazit
Registrován(a) od: 2008
Zobrazit více
Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Über uns
Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Geschichte
Mach4Metal wurde 1992 als Handelsunternehmen für gebrauchte Metallbearbeitungsmaschinen gegründet. Im Laufe der Jahre hat sich das Unternehmen zu einem weltweit führenden Unternehmen für gebrauchte Metallbearbeitungsmaschinen und verwandten Kategorien entwickelt. Wir sind ein angesehenes Mitglied zahlreicher Gewerkschaften weltweit.
Ruf
Derzeit verkaufen wir mehr als 500 Maschinen pro Jahr. Gewährleistet wird dies durch mehr als 6.000 unserer zufriedenen Kunden. Wir erhalten viele positive Google-Bewertungen und sorgen dafür das unser guter Ruf weiter bestehen bleibt.
Lage
Mach4Metal liegt zentral in Babberich, Niederlande, Europa, nahe der deutschen Grenze. Flughäfen, Bahnhöfe und Autobahnen befindet sich alles in unserer Nähe. Schauen Sie für nähere Informationen auf unsere Seite mit den Reiseinformationen.
Maschinen Bestand
Wenn Sie nach einer gebrauchten Metallbearbeitungsmaschine suchen, können Sie aus unserem täglich wechselnden Lagerbestand von mehr als 250 gebrauchten Qualitäts Maschinen wählen.
Bei uns finden Sie die besten Marken von CNC-gesteuerten Maschinen und conventionellen, die Ihnen von unseren eigenen Mitarbeitern vorgeführt werden können.
Dienstleistungen
Wir bieten Ihnen eine Gesamtlösung:
Bei Bedarf organisieren wir die Demontage, den richtigen Transport, und liefern die Maschine an den endgültigen Bestimmungsort. Wir kümmern uns dabei auch um Exportpapiere, Zollformalitäten, Versicherungen, CMR und andere notwendige Papiere.
Einkauf
Wir sind ständig am Kauf gebrauchter Maschinen und ähnlichen Produkten interessiert. Wir bieten Ihnen einen attraktiven wettbewerbsfähigen Preis und zahlen im Voraus per Banküberweisung. Darüber hinaus kümmern wir uns um die Demontage und den Transport von jedem Ort aus wo Sie die Maschine auch befindet.
Lagerhäuser
Unser Bestand ist in 7 Hallen mit einer Gesamtfläche von 40.000 m2 gelagert. Die Brückenkrane haben eine Tragfähigkeit von bis zu 85 Tonnen. Hier werden die Maschinen zum Verkauf vorbereitet und gegebenenfalls repariert.
Beratung
Mit unserem Wissen und unserer jahrelangen Erfahrung helfen wir Ihnen gerne mit kompetenter Beratung beim Kauf einer gebrauchten Maschine oder anderen Angelegenheiten. Wir freuen uns, Sie als einen unserer weltweiten Kunden begrüßen zu dürfen!
Über uns
Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Geschichte
Mach4Metal wurde 1992 als Handelsunternehmen für gebrauchte Metallbearbeitungsmaschinen gegründet. Im Laufe der Jahre hat sich das Unternehmen zu einem weltweit führenden Unternehmen für gebrauchte Metallbearbeitungsmaschinen und verwandten Kategorien entwickelt. Wir sind ein angesehenes Mitglied zahlreicher Gewerkschaften weltweit.
Ruf
Derzeit verkaufen wir mehr als 500 Maschinen pro Jahr. Gewährleistet wird dies durch mehr als 6.000 unserer zufriedenen Kunden. Wir erhalten viele positive Google-Bewertungen und sorgen dafür das unser guter Ruf weiter bestehen bleibt.
Lage
Mach4Metal liegt zentral in Babberich, Niederlande, Europa, nahe der deutschen Grenze. Flughäfen, Bahnhöfe und Autobahnen befindet sich alles in unserer Nähe. Schauen Sie für nähere Informationen auf unsere Seite mit den Reiseinformationen.
Maschinen Bestand
Wenn Sie nach einer gebrauchten Metallbearbeitungsmaschine suchen, können Sie aus unserem täglich wechselnden Lagerbestand von mehr als 250 gebrauchten Qualitäts Maschinen wählen.
Bei uns finden Sie die besten Marken von CNC-gesteuerten Maschinen und conventionellen, die Ihnen von unseren eigenen Mitarbeitern vorgeführt werden können.
Dienstleistungen
Wir bieten Ihnen eine Gesamtlösung:
Bei Bedarf organisieren wir die Demontage, den richtigen Transport, und liefern die Maschine an den endgültigen Bestimmungsort. Wir kümmern uns dabei auch um Exportpapiere, Zollformalitäten, Versicherungen, CMR und andere notwendige Papiere.
Einkauf
Wir sind ständig am Kauf gebrauchter Maschinen und ähnlichen Produkten interessiert. Wir bieten Ihnen einen attraktiven wettbewerbsfähigen Preis und zahlen im Voraus per Banküberweisung. Darüber hinaus kümmern wir uns um die Demontage und den Transport von jedem Ort aus wo Sie die Maschine auch befindet.
Lagerhäuser
Unser Bestand ist in 7 Hallen mit einer Gesamtfläche von 40.000 m2 gelagert. Die Brückenkrane haben eine Tragfähigkeit von bis zu 85 Tonnen. Hier werden die Maschinen zum Verkauf vorbereitet und gegebenenfalls repariert.
Beratung
Mit unserem Wissen und unserer jahrelangen Erfahrung helfen wir Ihnen gerne mit kompetenter Beratung beim Kauf einer gebrauchten Maschine oder anderen Angelegenheiten. Wir freuen uns, Sie als einen unserer weltweiten Kunden begrüßen zu dürfen!
Zobrazit další právní informace
Article 1 Definitions
The terms used in these general terms and conditions are defined as follows:
General Terms and Conditions: the Terms and Conditions listed below
Seller: MACH 4 METAL B.V.
Buyer: Any natural or legal person who purchases Products from Seller, or with whom Seller enters into an Agreement, or with whom Seller is currently negotiating in order to enter into an Agreement.
Products: All goods Seller will supply or has supplied pursuant to the Agreement.
Quotation: The offer made by Seller.
Agreement: Any Agreement with regard to the sales and delivery of Products by Seller, any supplement or alteration to said contract, as well as all legal acts in the preparation or for the execution of the Agreement.
Parties: Seller and Buyer are jointly referred to as the Parties.
Article 2 Applicability
1. These General Terms and Conditions apply to all (price) Quotations Seller makes and all Agreements between Parties.
2. Seller explicitly rejects all alterations and/or additions to these General Terms and Conditions, unless they were validated and accepted in writing. Furthermore, Seller explicitly rejects the applicability of Buyer’s Sales Conditions and/or general terms and conditions, unless these were validated and accepted in writing.
3. Should one or multiple provisions, or parts thereof, as recorded in these General Terms and Conditions be nullified or be determined to be invalid in any other way, this will not affect the validity of the other general terms and conditions. In that event Buyer is obligated to agree to one or multiple substitute stipulations, which will resemble the original provision(s) as closely as possible in both purpose and tenor.
Article 3 Establishment of the Agreement
1. Any Quotations and (price) tenders made by Seller shall remain free of engagement. Seller may revoke its Quotations at all times, even when a fixed acceptance term is listed in the Quotation. Buyer’s request for a Quotation or the placement of an order without prior Quotation, will be regarded a request for the production of a Quotation.
2. Data as well as information which are included in Quotations, images, catalogues, technical drawings, advice, and any other provided - subsequent - information, explicitly do not bind Seller.
3. All intellectual property rights with regards to the drawings and/or images presented as part of the offer, rest with Seller. Buyer is not allowed to multiply, publicise or copy any images or drawings without prior written permission.
4. Agreements are established by either an order confirmation or an invoice (should this precede the order confirmation) sent by Seller to Buyer.
Article 4 Prices
1. Prices are expressed in Euros and are, unless otherwise specified, exclusive of VAT, other taxes or surcharges, packing/packaging, and transport costs, as it is where it is.
2. Should one or more of the cost factors be altered after the date of the Quotation but before delivery, Seller is entitled to adjust the agreed on price accordingly, this also applies to binding quotations.
Article 5 Payment
1. Payment shall be made within 48 hours after the invoice date, unless otherwise agreed in writing. Payment should be effectively made in the agreed upon currency. Buyer cannot claim settlement and/or deferment.
2. Prior to the observance of its obligations pursuant to the Agreement, Seller is entitled to request proper security to support Buyer’s payment obligations. Buyer’s refusal to provide the requested security entitles Seller to annul the Agreement(s) in writing or - as is its prerogative- to suspend its obligations.
3. Should Buyer not make payment within the agreed on term, he is deemed to be in immediate default which entitles Seller to increase the amount due with either a default interest of 5% per month or the statutory commercial interest rate under article 6:119a BW (Dutch Civil Code), starting on the invoice date (a part of the month counting as a whole), of the gross invoice amount up until the time of full payment.
4. Should Buyer not meet its (payment)obligations, he is obligated to reimburse all (collecting)fees to Seller.
5. In contravention to paragraph 1, payment will be immediately due when the agreed on price (or part thereof) is not paid promptly, when Buyer is in a state of bankruptcy or equal circumstances, requests moratorium, when legal restraint or administration is requested, or when any attachment is placed on Buyer’s property or receivables.
Article 6 - Delivery
1. The delivery period provided by Seller is indicative only. The exceeding of the delivery period will not lead to Seller’s liability without factual proof of default.
2. Delivery of the Products will be made, unless otherwise agreed, ex works. The Products are deemed to be delivered once they have been offered by Seller to Buyer at the agreed on time and location for the first time.
3. Buyer is obligated to take possession of the Products on the agreed on time and place. Any transportation, storage or additional costs relating to Buyer’s not (timely) taking possession of the Products, will be at Buyer’s expense.
4. The risk of the Products transfers, regardless of the actual delivery, to Buyer upon the conclusion of the Agreement.
5. Should Buyer request delivery prior to the lapse of the agreed on delivery time, and to the extent to which such is feasible, all subsequent additional costs Seller incurs are at Buyer’s expense.
Article 7 Retention of Title and Claims
1. The ownership of the Products only transfers to Buyer, regardless of the actual delivery, after all claims Seller has pursuant to the Agreement or any other agreement, on Buyer in exchange for the delivered or deliverable Products, as well as claims with regard to any default in the execution of said agreements, have been settled.
2. Buyer is not entitled to transfer, pledge, encumber, process or in any way dispose of any Products still belonging to Seller, with the exception of actions which are part of Buyer’s normal work or company practice.
3. Should Buyer fail to meet the obligations pursuant to the Agreement or otherwise, or should reasonable doubt arise to his doing so in the future, Seller is entitled to remove, or have removed, from Buyer or third parties keeping said Products in storage for Buyer, the delivered Products on which the abovementioned retention of title applies. Buyer is obligated to cooperate with this process in any way.
4. Buyer is obliged to insure any Products delivered under retention of title and to keep them insured against fire, explosion and water damage and against theft and to present the insurance policy for inspection on Seller’s first request.
6. Upon buying, the buyer must inspect the products, after buying the complete risk will go over to the buyer, products are sold: ‘as is, where is ‘
7. Seller is entitled to start its own investigation into the nature, size and cause of the complaint. Under penalty of lapse of his right to claim, all Products relating to the claim made by Buyer, should be carefully stored and be presented to Seller upon first request or be send back to Seller.
8. Claims cannot be made should the defects be caused by everyday wear and tear.
9. Claims cannot be made with regard to defects caused by any external causes and/or Buyer’s actions or failings. In particular, although not exclusively, claims cannot be made should the defects be caused by improper or careless use and/or storage; heavy loading or unprofessional maintenance; repairs, alterations or removal carried out without explicit approval; non-compliance with the user and maintenance guidelines.
10. Claims cannot be made when the fact that the product does not meet its expectation is the result of any government requirements with regards to the nature or quality of the applied construction or materials. In the event of a change in the current technical opinions in the work field or to the relevant government requirements, a default cannot be attributed to Seller solely on that basis and Buyer is not entitled to make a claim solely as a result of this.
Should Buyer make a claim in compliance with the aforementioned, and should this claim be deemed just by Seller, Seller shall, as is its prerogative, determine whether to replace the affected goods or their affected parts, or reimburse them.
Article 8 - Force Majeure
1. Seller is not obligated to observe its obligations should he be hindered as a result of circumstances beyond his control for which he cannot lawfully, legally or socially be held accountable.
2. In these General Terms and Conditions force majeure comprises of all it includes pursuant to law and jurisprudence, as well as all external causes, whether foreseen or unforeseen, on which Seller has no influence, yet which prevent Seller from meeting his obligations, for instance, though not limited to, strikes at Seller’s company.
Article 9 Liability
1. Buyer is entitled to inspect the Products for any defects prior to purchase. The Products are sold and delivered ‘as is, where is’ at the time of the sale, without any warranty and with the exclusion of the provisions listed in article 7:15 and 7:17 BW (Dutch Civil Code), unless explicitly agreed otherwise. Therefore, Seller is not liable for any known or unknown defaults.
2. Seller is not liable towards Buyer with regard to the presence or absence of a CE marking.
3. Seller is not liable for any direct or indirect damage Buyer suffers, explicitly including although not limited to a loss of profits, loss of income, costs incurred during laying up, consequential loss, bodily injury, all forms of financial loss, as well as any claims by third parties, save in the event of intent or conscious recklessness on the side of Seller or by anyone part of Seller’s management.
4. Furthermore, any liability Seller might have in any circumstance, is limited to the damage covered and actually paid out by its insurance company with a maximum of the covered amount in such events.
5. Moreover, Seller shall, without prejudice to the abovementioned, never be held to any reimbursement of damages in the event the amount of the damage exceeds the amount invoiced by Seller for the Products to which the damage directly relates, exclusive of VAT and any other government levies.
Article 10 Disputes and Applicable Law
1. Dutch law shall exclusively govern all Agreements between Parties which are subject to these General Terms and Conditions. The application of the Vienna Sales Convention is expressly excluded.
2. Any disputes between Parties will be filed with the competent judge in the Arnhem district (in the Netherlands).
The terms used in these general terms and conditions are defined as follows:
General Terms and Conditions: the Terms and Conditions listed below
Seller: MACH 4 METAL B.V.
Buyer: Any natural or legal person who purchases Products from Seller, or with whom Seller enters into an Agreement, or with whom Seller is currently negotiating in order to enter into an Agreement.
Products: All goods Seller will supply or has supplied pursuant to the Agreement.
Quotation: The offer made by Seller.
Agreement: Any Agreement with regard to the sales and delivery of Products by Seller, any supplement or alteration to said contract, as well as all legal acts in the preparation or for the execution of the Agreement.
Parties: Seller and Buyer are jointly referred to as the Parties.
Article 2 Applicability
1. These General Terms and Conditions apply to all (price) Quotations Seller makes and all Agreements between Parties.
2. Seller explicitly rejects all alterations and/or additions to these General Terms and Conditions, unless they were validated and accepted in writing. Furthermore, Seller explicitly rejects the applicability of Buyer’s Sales Conditions and/or general terms and conditions, unless these were validated and accepted in writing.
3. Should one or multiple provisions, or parts thereof, as recorded in these General Terms and Conditions be nullified or be determined to be invalid in any other way, this will not affect the validity of the other general terms and conditions. In that event Buyer is obligated to agree to one or multiple substitute stipulations, which will resemble the original provision(s) as closely as possible in both purpose and tenor.
Article 3 Establishment of the Agreement
1. Any Quotations and (price) tenders made by Seller shall remain free of engagement. Seller may revoke its Quotations at all times, even when a fixed acceptance term is listed in the Quotation. Buyer’s request for a Quotation or the placement of an order without prior Quotation, will be regarded a request for the production of a Quotation.
2. Data as well as information which are included in Quotations, images, catalogues, technical drawings, advice, and any other provided - subsequent - information, explicitly do not bind Seller.
3. All intellectual property rights with regards to the drawings and/or images presented as part of the offer, rest with Seller. Buyer is not allowed to multiply, publicise or copy any images or drawings without prior written permission.
4. Agreements are established by either an order confirmation or an invoice (should this precede the order confirmation) sent by Seller to Buyer.
Article 4 Prices
1. Prices are expressed in Euros and are, unless otherwise specified, exclusive of VAT, other taxes or surcharges, packing/packaging, and transport costs, as it is where it is.
2. Should one or more of the cost factors be altered after the date of the Quotation but before delivery, Seller is entitled to adjust the agreed on price accordingly, this also applies to binding quotations.
Article 5 Payment
1. Payment shall be made within 48 hours after the invoice date, unless otherwise agreed in writing. Payment should be effectively made in the agreed upon currency. Buyer cannot claim settlement and/or deferment.
2. Prior to the observance of its obligations pursuant to the Agreement, Seller is entitled to request proper security to support Buyer’s payment obligations. Buyer’s refusal to provide the requested security entitles Seller to annul the Agreement(s) in writing or - as is its prerogative- to suspend its obligations.
3. Should Buyer not make payment within the agreed on term, he is deemed to be in immediate default which entitles Seller to increase the amount due with either a default interest of 5% per month or the statutory commercial interest rate under article 6:119a BW (Dutch Civil Code), starting on the invoice date (a part of the month counting as a whole), of the gross invoice amount up until the time of full payment.
4. Should Buyer not meet its (payment)obligations, he is obligated to reimburse all (collecting)fees to Seller.
5. In contravention to paragraph 1, payment will be immediately due when the agreed on price (or part thereof) is not paid promptly, when Buyer is in a state of bankruptcy or equal circumstances, requests moratorium, when legal restraint or administration is requested, or when any attachment is placed on Buyer’s property or receivables.
Article 6 - Delivery
1. The delivery period provided by Seller is indicative only. The exceeding of the delivery period will not lead to Seller’s liability without factual proof of default.
2. Delivery of the Products will be made, unless otherwise agreed, ex works. The Products are deemed to be delivered once they have been offered by Seller to Buyer at the agreed on time and location for the first time.
3. Buyer is obligated to take possession of the Products on the agreed on time and place. Any transportation, storage or additional costs relating to Buyer’s not (timely) taking possession of the Products, will be at Buyer’s expense.
4. The risk of the Products transfers, regardless of the actual delivery, to Buyer upon the conclusion of the Agreement.
5. Should Buyer request delivery prior to the lapse of the agreed on delivery time, and to the extent to which such is feasible, all subsequent additional costs Seller incurs are at Buyer’s expense.
Article 7 Retention of Title and Claims
1. The ownership of the Products only transfers to Buyer, regardless of the actual delivery, after all claims Seller has pursuant to the Agreement or any other agreement, on Buyer in exchange for the delivered or deliverable Products, as well as claims with regard to any default in the execution of said agreements, have been settled.
2. Buyer is not entitled to transfer, pledge, encumber, process or in any way dispose of any Products still belonging to Seller, with the exception of actions which are part of Buyer’s normal work or company practice.
3. Should Buyer fail to meet the obligations pursuant to the Agreement or otherwise, or should reasonable doubt arise to his doing so in the future, Seller is entitled to remove, or have removed, from Buyer or third parties keeping said Products in storage for Buyer, the delivered Products on which the abovementioned retention of title applies. Buyer is obligated to cooperate with this process in any way.
4. Buyer is obliged to insure any Products delivered under retention of title and to keep them insured against fire, explosion and water damage and against theft and to present the insurance policy for inspection on Seller’s first request.
6. Upon buying, the buyer must inspect the products, after buying the complete risk will go over to the buyer, products are sold: ‘as is, where is ‘
7. Seller is entitled to start its own investigation into the nature, size and cause of the complaint. Under penalty of lapse of his right to claim, all Products relating to the claim made by Buyer, should be carefully stored and be presented to Seller upon first request or be send back to Seller.
8. Claims cannot be made should the defects be caused by everyday wear and tear.
9. Claims cannot be made with regard to defects caused by any external causes and/or Buyer’s actions or failings. In particular, although not exclusively, claims cannot be made should the defects be caused by improper or careless use and/or storage; heavy loading or unprofessional maintenance; repairs, alterations or removal carried out without explicit approval; non-compliance with the user and maintenance guidelines.
10. Claims cannot be made when the fact that the product does not meet its expectation is the result of any government requirements with regards to the nature or quality of the applied construction or materials. In the event of a change in the current technical opinions in the work field or to the relevant government requirements, a default cannot be attributed to Seller solely on that basis and Buyer is not entitled to make a claim solely as a result of this.
Should Buyer make a claim in compliance with the aforementioned, and should this claim be deemed just by Seller, Seller shall, as is its prerogative, determine whether to replace the affected goods or their affected parts, or reimburse them.
Article 8 - Force Majeure
1. Seller is not obligated to observe its obligations should he be hindered as a result of circumstances beyond his control for which he cannot lawfully, legally or socially be held accountable.
2. In these General Terms and Conditions force majeure comprises of all it includes pursuant to law and jurisprudence, as well as all external causes, whether foreseen or unforeseen, on which Seller has no influence, yet which prevent Seller from meeting his obligations, for instance, though not limited to, strikes at Seller’s company.
Article 9 Liability
1. Buyer is entitled to inspect the Products for any defects prior to purchase. The Products are sold and delivered ‘as is, where is’ at the time of the sale, without any warranty and with the exclusion of the provisions listed in article 7:15 and 7:17 BW (Dutch Civil Code), unless explicitly agreed otherwise. Therefore, Seller is not liable for any known or unknown defaults.
2. Seller is not liable towards Buyer with regard to the presence or absence of a CE marking.
3. Seller is not liable for any direct or indirect damage Buyer suffers, explicitly including although not limited to a loss of profits, loss of income, costs incurred during laying up, consequential loss, bodily injury, all forms of financial loss, as well as any claims by third parties, save in the event of intent or conscious recklessness on the side of Seller or by anyone part of Seller’s management.
4. Furthermore, any liability Seller might have in any circumstance, is limited to the damage covered and actually paid out by its insurance company with a maximum of the covered amount in such events.
5. Moreover, Seller shall, without prejudice to the abovementioned, never be held to any reimbursement of damages in the event the amount of the damage exceeds the amount invoiced by Seller for the Products to which the damage directly relates, exclusive of VAT and any other government levies.
Article 10 Disputes and Applicable Law
1. Dutch law shall exclusively govern all Agreements between Parties which are subject to these General Terms and Conditions. The application of the Vienna Sales Convention is expressly excluded.
2. Any disputes between Parties will be filed with the competent judge in the Arnhem district (in the Netherlands).
Zavřít další právní informace
Zobrazit méně
Odeslat požadavek
TELEFON & FAX
+31 316 4... zobrazit
Tyto inzeráty by vás také mohly zajímat.
Inzerát
Kaiserslautern
0 km
Turn-Mill Centre
WFLMillturn M 35-G
WFLMillturn M 35-G
Inzerát
Hattingen
611 km
CNC soustružnické a frézovací centrum
WFLM 60
WFLM 60
Inzerát
Joseph Kellers vei 20, 3408 Tranby, Norway
1 161 km
CNC soustružnické a frézovací centrum
WFLM 60 x 3000
WFLM 60 x 3000
Inzerát
Linz
192 km
CNC soustružnicko-frézovací centrum
WFLM100 Millturn/5000mm
WFLM100 Millturn/5000mm
Inzerát
France
1 063 km
Stacionární betonárna
Centrale à béton compacte 100 m3Centrale à béton compacte 100 m³
Centrale à béton compacte 100 m3Centrale à béton compacte 100 m³
Inzerát
Barendrecht
800 km
Blender
Floor| 100% Elektrisch aangedreven betonmixer | 15 m...
Floor| 100% Elektrisch aangedreven betonmixer | 15 m...
Inzerát
Niederlangen
662 km
Dílenský lis - hydraulický
RHTC100 T / M/H-M/C-2
RHTC100 T / M/H-M/C-2
Inzerát
Trittau
549 km
Bezhroté - Bruska na kulato
NOMOCOM 100 E
NOMOCOM 100 E
Inzerát
Bremen
576 km
Deskový výměník tepla GEA NT 100 X o ploše 241,4 m² z nerezové oceli
Inzerát
Strassberg
499 km
Hydraulický jednosloupový lis
ZEULENRODAPYE 100 S/1 M
ZEULENRODAPYE 100 S/1 M
Inzerát
Wiefelstede
637 km
Vzduchová bubnová bruska
Paul & Eugen MayerP M B Ø 100 x 140 mm
Paul & Eugen MayerP M B Ø 100 x 140 mm
Inzerát
Bilbao
1 581 km
IRB 6400R S4CPlus REX 3,00 m / 100 kg
ABBIRB 6400R S4CPlus REX 3,00 m / 100 kg
ABBIRB 6400R S4CPlus REX 3,00 m / 100 kg
Inzerát
Borken
652 km
Ventilátor v hale Ventilátor dmychadla
Wolf KG 100 8000 m³/h
Wolf KG 100 8000 m³/h
Inzerát
Volkach
376 km
VAC-100 m
HorizonVAC-100m
HorizonVAC-100m
Inzerát
Bremen
576 km
Deskový výměník tepla GEA NT 100 X o ploše 241,4 m² z nerezové oceli
Inzerát
Nattheim
400 km
CNC obráběcí centrum
SCMMorbidelli M 100 (3-Achs)
SCMMorbidelli M 100 (3-Achs)
Inzerát
Wallersheim
641 km
Vakuová pumpa
KSBKRTK 100-400/654UG1-S 76.39 m³/h
KSBKRTK 100-400/654UG1-S 76.39 m³/h
Inzerát
Tönisvorst
660 km
Frézka pro nástrojárnu - Universal
MACMON-DeckelM 100 AD
MACMON-DeckelM 100 AD
Inzerát
Warder
789 km
Dílenský tisk
RHTC PROFI PERSTL-100 M/H-M/C-2
RHTC PROFI PERSTL-100 M/H-M/C-2
Inzerát
Volkach
376 km
Horizon | VAC-100 m | kolátor | 10 stanic | 2009
HorizonVAC-100m
HorizonVAC-100m
Inzerát
Gerolstein
633 km
Vakuová pumpa
KSBMTC RO A 100/7-8.1, 144 m³/h, H:513.7 m
KSBMTC RO A 100/7-8.1, 144 m³/h, H:513.7 m
Inzerát
Volkach
376 km
Horizon VAC-100 m
HorizonVAC-100m
HorizonVAC-100m
Inzerát
Volkach
376 km
Horizon | VAC-100 m | kolátor | 10 stanic | 2009
HorizonVAC-100m
HorizonVAC-100m
Inzerát
Volkach
376 km
Horizon | VAC-100 m | kolátor | 10 stanic | 2009
HorizonVAC-100m
HorizonVAC-100m
Inzerát
Volkach
376 km
Horizon | VAC-100 m | kolátor | 10 stanic | 2008
HorizonVAC-100m
HorizonVAC-100m
Váš inzerát byl úspěšně smazán
Došlo k chybě